WINTERGARD
HEAT TAPE for INSIDE YOUR WATER PIPE

DEAN BENNETT SUPPLY
1-800-621-4291

Smart Phone Dialable

 

In the pipe heat tape.

          Current Controller

New Controller (01/11)          


DOES YOUR WATER LINE FREEZE
DURING THE WINTER MONTHS?

Cold weather creates problems with freezing when water pipes are not buried deep enough to keep them protected. Our heat tape installs inside the water pipe to keep the inside warmer than freezing. These heat tape units are ideal for long lines going from a well to a house where the cold causes problems.

Thermostatically controlled, these heat tape units only heat when temperatures approach freezing. Because they turn off when not needed, they consume less energy than units that are on all the time.

WinterGard inside the pipe heat tapes can be installed in PVC or poly water lines without a problem.

NEED TO PROTECT A LINE THAT IS ALREADY INSTALLED?

The Retro-fit Inside the Pipe Heat Tape system allows you to install a heat tape inside the existing water line where the ability to insulate the outside of the pipe is not possible. The Retro-fit units provide higher heat to compensate for the lack of insulation. The Retro-fit heat tapes are available in 120V power for up to 150' lengths, and in 240V power for units over 160' long, up to 250'.

RETRO40 through RETRO250 models should be bought up to 1 foot shorter than the line they will protect. Retro-fit heat tapes are designed for 1" and 1 1/4" Polyethylene pipe. 240V units come with a thermostat and must be connected to a GFI breaker.

 Model Description Voltage Price
RETRO40 40' Retro-fit In-Pipe Heat Tape 120V $   808.00
RETRO50 50' Retro-fit In-Pipe Heat Tape 120V $   850.00
RETRO60 60' Retro-fit In-Pipe Heat Tape 120V $   875.00
RETRO70 70' Retro-fit In-Pipe Heat Tape 120V $   926.00
RETRO80 80' Retro-fit In-Pipe Heat Tape 120V $ 1118.00
RETRO90 90' Retro-fit In-Pipe Heat Tape 120V $ 1162.00
RETRO100 100' Retro-fir In-Pipe Heat Tape 120V $ 1226.00
RETRO110 110' Retro-fit In-Pipe Heat Tape 120V $ 1315.00
RETRO120 120' Retro-fit In-Pipe Heat Tape 120V $ 1365.00
RETRO130 130' Retro-fit In-Pipe Heat Tape 120V $ 1474.00
RETRO140 140' Retro-fit In-Pipe Heat Tape 120V $ 1528.00
RETRO150 150' Retro-fit In-Pipe Heat Tape 120V 1588.00
BELOW MODELS ARE 240V UNITS
RETRO160 160' Retro-fit In-Pipe Heat Tape 240V 1253.00
RETRO170 170' Retro-fit In-Pipe Heat Tape 240V $ 1298.00
RETRO180 180' Retro-fit In-Pipe Heat Tape 240V $ 1335.00
RETRO190 190' Retro-fit In-Pipe Heat Tape 240V $ 1396.00
RETRO200 200' Retro-fit In-Pipe Heat Tape 240V $ 1465.00
RETRO210 210' Retro-fit In-Pipe Heat Tape 240V $ 1503.00
RETRO220 220' Retro-fit In-Pipe Heat Tape 240V $ 1551.00
RETRO230 230' Retro-fit In-Pipe Heat Tape 240V $ 1623.00
RETRO240 240' Retro-fit In-Pipe Heat Tape 240V $ 1646.00
RETRO250 250' Retro-fit In-Pipe Heat Tape 240V $ 1685.00


NEW WATER LINE INSTALLATION WHERE
INSULATING IS POSSIBLE


Installed inside the water line, the unit is protected against damage from outside sources. This makes the unit last longer than heat tapes that wrap around the pipe and are exposed to abuse. The temperature sensor is attached to the outside of the pipe to thermostatically control when to turn on the heat tape.
     
 Model #

Description

Price
MINI14 14' Inside the Pipe Heat Tape 1/2" - 1-1/4" Pipe $   484.00
MINI18 18' Inside the Pipe Heat Tape 1/2" - 1-1/4" Pipe $   503.00
MINI22 22' Inside the Pipe Heat Tape 1/2" - 1-1/4" Pipe $   521.00
MINI26 26' Inside the Pipe Heat Tape 1/2" - 1-1/4" Pipe $   539.00
MINI30 30' Inside the Pipe Heat Tape 1/2" - 1-1/4" Pipe $   558.00
MINI34 34' Inside the Pipe Heat Tape 1/2" - 1-1/4" Pipe $   576.00
MISER14 14' Miser Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $   820.00
MISER18 18' Miser Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $   836.00
MISER22 22' Miser Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $   853.00
MISER26 26' Miser Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $   870.00
MISER30 30' Miser Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $   887.00
MISER34 34' Miser Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $   903.00
MISER40 40' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $   920.00
MISER50 50' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $   952.00
MISER60 60' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe 1034.00
MISER70 70' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $   902.00
MISER80 80' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $   912.00
MISER90 90' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $   939.00
MISER100 100' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $   959.00
MISER110 110' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $   995.00
MISER120 120' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe 1000.00
MISER130 130' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe 1012.00
MISER140 140' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $ 1081.00
MISER150 150' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $ 1144.00
MISER160 160' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $ 1166.00
MISER170 170' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe 1206.00
MISER180 180' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $ 1272.00
MISER190 190' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $ 1308.00
MISER200 200' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $ 1382.00
MISER210 210' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $ 1422.00
MISER220 220' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $ 1521.00
MISER230 230' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $ 1532.00
MISER240 240' Inside the Pipe Heat Tape 1" - 1-1/4" Pipe $ 1546.00
The pipe should be protected with closed cell insulation to insure proper temperature sensing operation. Available in lengths from 18' up through 240', there is a in-pipe heat tape for every application, and they run on standard 120V power.

MINI18 through MINI34 models are selected to be up to 6 inches shorter than the pipe line they will protect. If your heat cable is longer than the pipe, you can add additional pipe length to accommodate the extra length of the cable. These MINI models have a fitting with a 1/2" male pipe thread on the end that will connect to your threaded tee. Use a tee that matches your pipe size, and then use a reducing bushing in it to have a female 1/2" thread to screw the heat tape fitting into. Also be aware that the MINI does not come with a GFI circuit. You will have to install a
5 mA ground-fault circuit interrupter for the plug receptacle.
Installing into a water pipe from inside.

MISER40 through MISER250 models should be ordered up to 1 foot shorter than the water line they protect, since they are more rigid, and unable to flex inside the pipe to take up length.

These heat tapes for inside your water pipe are a special order item. Be sure to pick the size that is closest to the length of your water line.

Download Internal Heat Tapes in pdf

Download Mini In Pipe Heat Tapes Installation in pdf

Download Miser In Pipe Heat Tapes Installation in pdf

Download Retro 120 In Pipe Heat Tapes Installation in pdf

Download Retro 240 In Pipe Heat Tapes Installation in pdf

Home     External Heat Tape Prices

Prices effective December 10, 2012

Download our catalog in pdf format

No Return of Merchandise