WinterGard Plus heat tracing cable is a 6 watt per foot
heat tape operating on 120V power, for use on water pipes to protect them
from freezing. WinterGard Plus is designed for use on pipes in a dry
WinterGard Plus Heat Trace Cable is
6 watt per foot 120V Heat Tape
for protection of water pipes from freezing.
120V Electronic Temperature Control Electronic Temperature Control unit has a temperature differential range of 1 Degree F to 30 Degrees F. Unit can control temperatures from -30F to 220F, however you will not need the range capabilities of this control for use with heat tape for on your roof or on water pipes
Thermo Cube is a device which plugs into a standard GFI protected 120V AC outlet to automatically control turning power on and off for heat tape or stock tank heaters. By plugging the device into the Thermo Cube, when the air temperature reaches 35 degrees F, the Thermo Cube will turn on the power. When the Air temperature gets up to 45 degrees F, the power will turn off. This makes your heat tape more efficient to operate, since you are not having to run the power all the time. According to the manufacturer, you can use the Thermo Cube to control heat tape or stock tank heaters that are rated up to 1800 watts maximum or 15 amps total on 120V GFI protected circuits.
TC3 is 3-1/4" wide and 1-3/8" high and 1" thick, and has place for two 3 prong plugs to plug into it.
DEAN BENNETT SUPPLY
Raychem WinterGard Plus heat trace cable is a professional grade of 6 watt per foot, 120V self regulating electrical heat tape that is designed to protect water pipes from freezing in light commercial and residential applications. The WinterGard Plus heat trace cable is constructed of nickel-copper bus wires, a self regulating conductive core, and insulating jacket and a tinned-copper braid outer layer.
Benefits of using WinterGard Plus sell regulating heat tape are
The WinterGard Plus Heat Trace Cable can be overlapped without burning itself out.
The WinterGard plus Heat Tape can be cut to length.
WinterGard Plus heat trace cable is designed for use in a dry location only.
WinterGard Plus heat tape can be used for freeze protection on pipe up to 6" in diameter.
WinterGard Plus is UL Listed and CSA Certified for use in non-hazardous locations.
WinterGard Plus heat trace cable is designed for use at 120V using 6 watts per foot in a length as long as 200' of heat tape. Depending on the temperature you must protect against, and the thickness of the closed cell insulation used on the pipe, the following chart applies. WinterGard Plus is much heavier duty than Frostex Plus heat tape, and can be used for those lengths longer than 50' in length. WinterGard Plus is 6 watt per foot of heat power to give more protection than even WinterGard 3 watt per foot heat trace cable does.
WinterGard Plus Heat Tape for Metal & Plastic Pipes
Plus 120V 6 watt per foot heat tape is
to be applied straight along the pipe. Chart indicates Metal when only able to
use on Metal, and says Both when it can be used on both PVC and Metal pipe.
there is a number in the chart it indicates that you need to multiply your feet
of pipe by that number to get the required feet of heat tape for the pipe being
protected, and spiral it around the pipe. Indicated for the size of pipe and the thickness of closed cell insulation used
on the outside of the pipe to protect to the desired temperature. Normally add
1' for plug kit and 1' for end fitting.
HEAT TAPE PRICE SHEET
WinterGard Plus is able to be used on pipe as large as 6" diameter. Call us for further details on larger sizes than shown in our chart.
No Return of Merchandise
Prices effective July 20, 2012